Our website uses cookies, click here to view our cookie policy
Customer Helpline
01664 410414

Tag Archives: drive in racking

Drive in racking Installation – Long Clawson Dairy

Storage Concepts have been delighted to carry out the design and installation for the King of cheeses –  Stilton.

 

Long Clawson Dairy is an established manufacturer of the best quality Stilton cheese in the United Kingdom and Storage Concepts have recently installed a combination of drive in racking and conventional pallet racking to satisfy their production needs and continued expansion.

The systems have been installed in chill rooms to store a combination of raw materials, finished goods and packaging materials utilising pallets which are 1000kgs UDL.

What are the weight limits for Pallet Racking?

What are the weight limits for Pallet Racking?

Narrow Aisle Pallet Racking

Regarding pallet racking weight limits, there are many and varied limits available.  The maximum load allowed per pair of beams is normally 4 tonnes, but standard load is 2 tonnes where 2 No. 1 tonne pallets are sited next to each other.

Most pallet racking systems have a standard duty frame, a medium duty frame and a heavy duty frame with standard duty frames normally carrying 9 tonnes, medium duty 15 tonnes and heavy duty 20 tonnes, dependent on the heights and depths of the frames.

The general specification for pallet racking is the width of the bays, the standard bays being 2.7m wide, therefore 2 No. 1200mm pallets can sit on the beams giving a 100mm gap between each pallet and the end frames.  Depths of frames can vary but the most standard is 900mm where a 1m deep pallet will sit on the beams leaving a 50mm overhang either side, which is the ideal safety standard.  Normally 75mm is then left between the top of the pallet and the underside of the next beam level, which gives clearance for the pallets being lifted from the beams.

The frames can be any height to suit the warehouse they are being installed in and the frame depths can vary from 900mm to a maximum of 1500mm deep.

On systems where there are varied sizes of pallets, pallets support bars can be used across the beams, front and back, to store the pallet safely.

This can also be achieved with shelf panels but these have to be checked from the point of loadings and that they do offer a load bearing capacity.

Mesh shelf panels can also be fitted onto the beams and for stillage systems there are skid channels which are similar to pallet support bars but are a channel system so the stillages fit onto the skid channels safely.

All pallet racking is bolted to the floor for extra safety and safety racking clips are fitted into the beams and the frames for extra safety when the pallet systems are being loaded/unloaded.

Leg and corner guards can also be fitted for additional safety.

Have a query regarding pallet Racking? If so, please call Storage Concepts on 01664 410414 or us this contact form and one of our team will be in contact shortly.

Storage Concepts ~Making Space Work Harder

What types of pallet racking are there?

What types of pallet racking are there ?

Pallet Racking from Storage Concepts

There are many types of pallet racking systems including the standard bay type when normally 2 No. 1200mm wide pallets are fitted onto a 2700mm long beam with the 1m depth of the pallet sitting into the bay which is normally 900mm deep with a 50mm overhang each side.  Heights can vary from low level 2m up to 15m high.

There are also narrow aisle pallet racking systems where the aisles are normally set at say 1.5m which maximises the cube of a warehouse and specialist narrow aisle trucks are used.

The aisles can be wire guided so the fork truck will follow the wire guide so as not to damage the racking or guide rails can be used as an alternative method.

The narrow aisle can also be regarded as high bay pallet racking because normally the bays are fitted into high bay warehouses.

Further pallet racking types

Another system to maximise space is drive-in racking which is based on deep lanes so that a standard type pallet can be fitted, therefore saving the requirement for aisles and thereby saving space.  These systems can vary in depth and height and the pallets fit onto stub arms which allows the fork lift truck loading the pallets to drive into the bays to load the pallets.

Pallet racking can also be fitted onto mobile bases which are normally electric, again standard bay sizes and this system again allows the saving of aisle space.

Have a query regarding pallet Racking? If so, please call Storage Concepts on 01664 410414 or us this contact form and one of our team will be in contact shortly.

Storage Concepts ~Making Space Work Harder

Maximising Profitability Without Costing The Earth

Racking up your productive space

Tidy up your warehouse with a racking system

Whatever business you’re in – wholesale, retail, distribution, manufacturing etc – the functionality and effectiveness of your warehousing operation is key to maximising profitability. The most cost efficient use of space is the main objective of Storage Concepts’ warehouse racking systems, but there are other issues to be aware of.

The latest health and safety regulations have strong recommendations on storage and could force you into embarking on an expensive renovation programme, or even make you consider relocating your warehousing. » Read more…

Drive in racking system, Leicestershire

Drive in racking installed by Storage Concepts

Storage Concepts were asked by a large Leicestershire based company to design a storage system to accommodate over 1,000 pallets at any one time.

We therefore suggested, designed and installed a drive-in racking system with has proved to be most successful from the company’s point of view.